Scalescenes produce a range of downloadable card kits in a PDF format for you to print yourself. You can re-print as many times as you want to make up an extensive built environment on your layout, Kits can be combined and adapted to create your own customised structures. Click on the picture to the right to visit their website.
To add even greater realism to Scalescenes kits, I have produced a range of customised 3D printed objects that can be used with them. The most simple enhancement is to substitute 3D printed chimney pots. The shape is more realistic than rolled paper and cheaper and less fiddly to install than metal castings.
3D printed windows make fora more three dimensional representation of windows than cut window overlays and are a cost effect alternative to brass etchings. 3d printed doors also provide a degree of additional relief not achievable with printed card.
3D printed items are being added to this range all the time. If there is a particular kit that you want items for that is not yet in the range, please leave a comment in the comments section at the bottom of the page.
A set of 10 sash windows matching the style and size of a Scalescenes large sash window.
A set of chimney pots on mortar haunching to suit the Scalescenes T008 Low Relief House Backs downloadable card kit. Pots are printed on a connecting sprue to minimise printing costs. Separate from sprue with a sharp knife and file or sand smooth. The pots and mortar need then to be painted and can then be glued to the top of the card chimney stack.
A set of chimney pots on mortar haunching to suit the Scalescenes T019 Row of Cottages downloadable card kit. The pots and mortar need to be painted and can then be glued to the top of the card chimney stack
Windows, exterior doors and chimney pots to suit the T022 Scalescenes Small Terraced Houses Kit.
Glaze window with acetate, and insert into openings from the inside into wall base layer with a small amount of glue applied to window architrave and internal sill to secure in place.
Chimney pots on mortar haunching to suit the T022 Scalescenes Small Terraced Houses Kit. 3 sets of pots are needed for the first pair of houses pots. Then two,a double row and single row for each pair of houses added to the terrace.
Paint pots and haunching and glue to top of chimney stack.